Skip to content

How to change DNS on different IPTV devices

Change the DNS server on a Samsung, LG, or Sony Smart TV, Formuler or MAG box, Apple TV, iPhone, iPad, or Android device.

Updated November 14, 2026 7 min read


On this page

This guide shows how to change the DNS server on a Samsung, LG, or Sony Smart TV, a Formuler or MAG box, an Apple TV, an iPhone, an iPad, or an Android device. A different DNS server can improve your internet speed and fix many internet streaming problems.

You do not have to change your DNS server, but small network changes can help. DNS servers play a major role in IPTV streaming, so check the current DNS setting if you have problems streaming.

Before you start

Before you change any DNS address, write down the current DNS address so you can restore it later. If the original setting was Automatic, you can return to Automatic at any time. This applies to every device in this guide.

DNS addresses

DNS providerAddresses
Cloudflare DNS1.0.0.1 or 1.1.1.1
Google DNS8.8.8.8 or 8.8.4.4
Open DNS208.67.222.222 or 208.67.220.220
DNS Watch82.200.69.80 or 84.200.70.40

Use one address from the table when a step asks for a DNS server. If the device has a second DNS field, enter another address from the table.

Samsung Smart TV

  1. Press Menu on the remote.
  2. Under Settings menu, select Network, then Network Status.
  3. Wait for three buttons to appear, then select IP Settings.
  4. Select DNS setting, then Enter manually.
  5. Enter a DNS address from the table and select OK.
  6. Restart the Samsung Smart TV so the new DNS settings take effect.

LG Smart TV

  1. Press Menu on the remote.
  2. Select Settings, then All settings.
  3. Scroll to Network, then select Network Connection.
  4. Select Set Expert.
  5. Under IP Mode, select Dynamic. Under DNS Server, select Manual.
  6. Enter a DNS address from the table and select OK.
  7. Restart the LG Smart TV so the new DNS settings take effect.

Sony Smart TV

  1. Press Home on the remote.
  2. Select Setup, then Network.
  3. Select Network Setup.
  4. Select Expert.
  5. Select Wi-Fi or Wired LAN, depending on your connection.
  6. Select Status Info.
  7. Write down your IP address.
  8. Go back to Network and select Advanced options.
  9. Select IP settings.
  10. Select Static.
  11. Enter the first three groups of numbers from your IP address in the IP address field. For example, if your IP address is 192.166.1.1, enter 192.166.1.. Enter 50 as the fourth group and select Next. The final address is 192.166.1.50.
  12. In Gateway, enter the full IP address of your router and select Next.
  13. Enter 24 in Network prefix length and select Next.
  14. Enter your preferred DNS address from the table and select Next.
  15. For DNS 2, enter an alternate DNS address from the table and select Next.
  16. Select OK.
  17. Restart the Sony Smart TV so the new DNS settings take effect.

Formuler box

  1. Open Network Settings.
  2. Select IP settings.
  3. Select Static.
  4. In IP address, enter an IP address that is not used by another device on your local network, or keep the value shown in the IP address screenshot below.
  5. In Gateway, enter the gateway address, or leave the field empty. If the gateway is already correct, continue.
  6. In Network prefix length, enter 24 and continue.
  7. In DNS 1, enter a DNS address from the table and save.

MAG box

  1. Open Settings.
  2. Select System settings.
  3. Select Network, then Auto (DHCP), manual DNS.

    Use an address from the DNS table for the manual DNS fields.
  4. Restart the device so the new DNS settings take effect.

Apple TV

  1. Open Settings on the Apple TV home screen.
  2. Select Network.
  3. Select Wi-Fi.
  4. Choose your Wi-Fi network.
  5. Scroll down and select Configure DNS.
  6. Select Manual.
  7. In the DNS field, enter a DNS server address from the table. Enter three digits for each cluster; for example, 1.11.111.123 becomes 001.011.111.123. Then select Done.
  8. Go back to Settings and select General.
  9. Select Region Format.
  10. Select your region, such as United States.
  11. Return to the main screen, open Settings, and select Sleep Now.
  12. Unplug the Apple TV power cord and wait 10 seconds.
  13. Plug the Apple TV back in. The new DNS settings take effect after the restart.

iPhone

  1. Open Settings.
  2. Select Wi-Fi, then choose the network you are using.
  3. In the DNS field, enter the DNS server addresses from the table.
  4. Go back to Wi-Fi to save the changes.

iPad

  1. Open Settings, select Wi-Fi, then select the network you are connected to.
  2. In the DNS field, enter the DNS server addresses from the table.
  3. Tap Wi-Fi in the upper-left corner to save the changes.

Android device

  1. Open Settings.
  2. Select Wi-Fi, then press and hold the active wireless network until a dialog opens.
  3. Select Modify network config.
  4. Check Show advanced options.
  5. Change IP settings to Static.
  6. In the DNS 1 and DNS 2 fields, enter the DNS server addresses from the table and select Save.
  7. Restart the device so the new DNS settings take effect.

More in Troubleshooting

Still stuck?

Our support team can help you set up your device or fix a problem.

Contact support