How to set up IPTV on Enigma2 with an autoscript
Run an IPTV provider autoscript on an Enigma2 receiver over Telnet and load the IPTV bouquet.
Updated November 14, 2026 2 min read
Enigma2 is open-source software on Linux-based receivers such as VU+ and Dreambox. It adds features such as auto-bouquets, a 7-day EPG (electronic program guide), and picons (channel icons).
Older VU+ set-top boxes use MIPS processors. Newer models use ARM processors and run Enigma2 image-based firmware. The firmware is officially user-upgradable because the receiver is a Linux computer, unlike third-party patching of other receivers. Enigma2 was originally designed for Dreambox by Dream Multimedia. For a Dreambox, see how to set up IPTV on Enigma2 with the XtreamTV plugin.
Before you start
You need Dreambox Control Center for Enigma2 (DCC_E2) on a computer on the same network as the receiver. You also need the autoscript command from your IPTV provider. The receiver username and password are usually root and root.
Find the receiver IP address
- Press Menu on the remote.
- Go to Settings.
- Select Network Settings.
- Note the IP Address shown on the screen.
Connect with DCC_E2
- Open DCC_E2 on your computer.
- Enter the receiver IP address.
- Enter the username and password. The defaults are usually
rootandroot. - Select Telnet.
Run the autoscript
The autoscript command comes from your IPTV provider. It has two versions:
- OE1.6 uses Python 2.6. Use this version on non-Dreambox receivers.
- OE2.0 uses Python 2.7. Use this version on Dreambox receivers.
For a Dreambox, the command looks like this:
wget -O /etc/enigma2/iptv.sh "http://tv.yourdns.com/get.php?username=your-line-username&password=your-line-password&type=enigma216_script&output=ts" && chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh
- Paste the command into the Telnet terminal.
- Press Enter to run it.
- Type
reboot. - Press Enter to restart the receiver.
- After the reboot, check the bouquet list for a new group called IPTV.
More in MAG & Set-Top Boxes
Still stuck?
Our support team can help you set up your device or fix a problem.