How to factory reset a TVIP box
Reset a TVIP box on newer or older firmware to clear all settings when other fixes do not work.
Updated November 14, 2026 1 min read
TVIP boxes are set-top boxes for watching IPTV. They are also called the Russian version of MAG boxes. TVIP boxes run their own operating system, and their MAC address format starts with 10:27:BE:XX:XX:XX.
For setup, read how to set up IPTV on a TVIP box.
Sometimes you try everything and still cannot solve a problem with the box. A factory reset may be the only option left. Before you reset, check the remote control. In many cases, the problem was the remote, not the box. See how to fix a TVIP remote control problem.
TVIP boxes have two factory reset methods. The method depends on the firmware version.
Reset a TVIP box with firmware 3.8.6 or later
Use this method for the TVIP 410, 412, and 605, and for other boxes with firmware 3.8.6 or later.
- Press S.INFO on the remote.
- Press 4.
- Press 9.
- Press S.INFO again.
- Wait for the message Do you want to make factory reset that will clear ALL setting?
- Press OK to confirm the reset.
You can use this method on all TVIP boxes after the 410 model, such as the TVIP 412, 415, 501, 605, 615, and 705.
Reset an older TVIP box
Use this method for TVIP boxes with firmware earlier than 3.8.6, such as the older TVIP 110 with firmware earlier than 3.6.8.
- Press and hold Power on the remote for 5 seconds.
- Press OK when the message appears on the box.
More in MAG & Set-Top Boxes
Still stuck?
Our support team can help you set up your device or fix a problem.