Skip to content

How to update a MAG box

Update MAG box firmware automatically, with the remote, or from a USB drive.

Updated November 14, 2026 2 min read


Sometimes the best way to fix an issue is to update the MAG box to the latest firmware. This guide shows how to update the firmware automatically and how to update it from a USB drive.

Update the firmware automatically

  1. Disconnect the MAG box from the internet.
  2. Reset the MAG box.
  3. Wait until Page Loading Error appears on the screen.
  4. Plug the internet cable back into the box.
  5. Select Embedded Portal. The box updates to the latest version.

If the automatic update does not start:

  1. Press SET on the remote.
  2. Select Software update.
  3. Press OK.
  4. Press F1.

Update the firmware from a USB drive

Some MAG devices lose their portal settings after a system software update. They then cannot add portal addresses. You can update the system software from a USB drive.

Before you start, make sure the USB drive meets the software update requirements. Download the imageupdate file for your model. The latest factory software image is on the manufacturer's server at http://update.infomir.com/mag/MODEL/imageupdate, where MODEL is the STB model number. See the Infomir software page. For example, the MAG322 file is http://update.infomir.com/mag/322/imageupdate.

  1. Create a directory named mag plus your model number in the root of the USB drive. For a MAG322, the directory is mag322.
  2. Write the imageupdate file to this directory. For a MAG322, the directory name is mag322.
  3. Connect the USB drive to any USB port on the box, front or rear.
  4. Open Settings.
  5. Select System settings.
  6. Select Software update.
  7. Set Update method to USB. The Disk and Path fields appear.
  8. Select Verify (OK) to check that the box detects the imageupdate file.
  9. Wait for the Software update window. It appears if the file is detected and readable.
  10. Compare the Current version and New version.
  11. Choose an action:
    • To reject the update, press Exit.
    • To start the update, press Update (F1).
  12. Watch the progress bar.

    To view the update log, press Show log (Info on the remote).
  13. Wait until the update finishes. The box restarts automatically. Do not turn off the box or unplug the USB drive until the update is complete.

More in MAG & Set-Top Boxes

Still stuck?

Our support team can help you set up your device or fix a problem.

Contact support